SUPER FIX JB-100 is a high strength, solvent borne Rubber base adhesive. It is suitable for Jewellery or handicrafts application and will bond a wide variety surfaces including plastic like(PP) materials , nylon fabric, Rexine, polyurethane coated fabric ,wood,particle board. It is specifically designed for Jewellery and Crafts industries.
# Economic in use
# outstanding green strength
# good brushability
# High initial strength
# Toughness of bond
| Appearance | Base | Solvent | Viscosity | Flash Point | Density at 25°C | Drying Time | Final Setting Time |
|---|---|---|---|---|---|---|---|
| Brown liquid | Synthetic rubber | Aliphatic & Aromatic Polar Solvents | 550±600 cps at 30°C | -15 to 0°C | 0.9±0.02 | 10 to 15 Minutes | 24 hours |
The surface to be bonded should be clean and dry. Roughening or scouring may be recommended for porous material like leather. A thin layer of adhesive is to be applied on the surfaces to be bonded. Wait for about 10 minutes to evaporate the solvent, place the coated surfaces one above the other while the adhesive remains tacky. Press the coated surfaces firmly together.
0.5 Litre, 1 Litre, 2 Litres, 5 Litres, 20 Litres, 25 Litres, 30 Litres
Store in well sealed container Superfix JB-100 will keep satisfactorily for 12 months from date of manufacture, Low and high temperature storage should be avoided and the adhesive should preferably be stored within the temperature range 10 to 30 deg C
The technical information, recommendations and other statements contained in this document are based upon tests or experience that Super bond Manufacturing Pvt Ltd believes are reliable, but accuracy of such information is not guaranteed.
Do not expose to naked flame.
Adhesive Solution, Industrial Adhesives, Adhesive Packaging, New Items, Synthetic Adhesives
© Super Bond Manufacturing Pvt. Ltd All Rights Reserved. (Terms of Use) Developed and Managed by TechMobia.com
Write Your Message or Query
